Identifikasi, Penilaian dan Pengendalian Risiko Kecelakaan Kerja dengan Metode HIRARC di PT ABC
Abstract
PT ABC is one of the companies engaged in logistics with a high potential for work accidents as a result of the many types of raw materials stored, such as chemical raw materials, as well as the use of heavy equipment such as forklifts and storage of goods on high shelves. Several work-related accidents have occurred in the warehouse area which resulted in injury to workers or damage to equipment, such as collisions with tools or goods and fires due to electrical short circuits. In addition, several other risks also occur, such as low back pain caused by manual lifting of goods, damage to walls or buildings due to being bumped or hit by a forklift. This study aims to determine how high the level of work accidents at PT ABC is and how prevention needs to be done to avoid these accidents. The method used in this research is Hazard Identification Risk Assessment and Risk Control (HIRARC) to find out how high the level of work hazard or accident is. The results of this study indicate that there are 10 potential work accidents at PT ABC, where the process of moving goods and stuffing is a job that has the highest rate of work accidents.
References
Afredo, L. W., & Tarigan, U. P. P. B. (2021). Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control). JURITI PRIMA (Junal Ilmiah Teknik Industri Prima), 4(2), 30–37.
Andriani, M.Kes, D. R., Hudayah, N., & Hasmina, H. (2020). Hubungan Penggunaan Alat Pelindung Diri (APD) dengan Keluhan Penyakit Kulit pada Pekerja Daur Ulang Sampah Plastik Kamboja di Kecamatan Wolio Kota Baubau. Jurnal Kesehatan Global, 3(2), 69–75. https://doi.org/10.33085/jkg.v3i2.4648
Fathimahhayati, L. D., Wardana, M. R., & Gumilar, N. A. G. (2019). Analisis Risikok3 Dengan Metode Hirarc pada Industri Tahu Dan Tempe Kelurahan Selili, Samarinda. Jurnal REKAVASI, 7(1), 62–70.
Ferusgel, A., Anjanny, A., & Siregar, D. M. S. (2019). Keluhan Musculoskeletal Disorders (MSDs) pada Pekerja Pengguna Komputer Di badan Pusat Statistik Provinsi Sumatera Utara. Jurnal Kesehatan Global, 2(1), 47. https://doi.org/10.33085/jkg.v2i1.4068
Ghika Smarandana, Ade Momon, & Jauhari Arifin. (2021). Penilaian Risiko K3 pada Proses Pabrikasi Menggunakan Metode Hazard Identification, Risk Assessment and Risk Control (HIRARC). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 56–62. https://doi.org/10.30656/intech.v7i1.2709
Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 106–110.
Muharani, R., & Dameria, D. (2019). Faktor yang Berhubungan dengan Kejadian Kecelakaan Kerja Pada Pekerja di Bagian Produksi Pabrik Kelapa Sawit Adolina PTPN IV Kabupaten Serdang Bedagai. Jurnal Kesehatan Global, 2(3), 122. https://doi.org/10.33085/jkg.v2i3.4438
Pendidikan, S., Mesin, T., Teknik, F., Surabaya, U. N., Mesin, J. T., Teknik, F., & Surabaya, U. N. (2019). Identifikasi Bahaya Dengan Metode Hazard Identification , Risk Assessment And Risk Control ( Hirarc ) Dalam Upaya Memperkecil Risiko Kecelakaan Kerja Di Pt . Pal Indonesia Desy Syfa Urrohmah Dyah Riandadari. 08, 34–40.
Ponda, H., & Fatma, N. F. (2019). Identifikasi Bahaya, Penilaian Dan Pengendalian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Departemen Foundry Pt. Sicamindo. Heuristic, 16(2), 62–74. https://doi.org/10.30996/he.v16i2.2968
Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Seminar Nasional Riset Terapan, November, 164–169.
Rosdiana, R. (2019). Hubungan Stres Kerja, Jam Kerja, Dan Kelelahan Kerja Dengan Tingkat Konsentrasi Pada Pekerja Pengguna Komputer Di Pt. Telekomunikasi Witel Medan. Jurnal Kesehatan Global, 2(3), 131. https://doi.org/10.33085/jkg.v2i3.4384
Triswandana, E. (2020). Penilaian Risiko K3 dengan Metode HIRARC. UKaRsT, 4(1), 96. https://doi.org/10.30737/ukarst.v4i1.788
