Tinjauan Keselamatan Kerja dengan Metode Hazard and Operability Study (Hazop)

Studi Kasus di UMKM XYZ

  • Aditiya Rizka Ramadhan Universitas Singaperbangsa Karawang
  • Ade Momon Universitas Singaperbangsa Karawang

Abstract

This study aims to analyze the application of K3 using the Hazard and Operability Study (HAZOP) method in increasing work productivity at UMKM XYZ. The research was conducted using the Hazard and Operability Study (HAZOP) method on several work accidents that occurred at UMKM XYZ for a certain period of time and analyzed based on data on the number of work accidents. Primary data collection was carried out by the observation method and secondary data collection by the literature method. In this study, measurements were made by taking into account likelihood and consequence, and then using a risk matrix. That is assessing the existing risk (risk assessment) by defining the criteria for likelihood and consequences (severity). The likelihood criterion used is the frequency which is calculated quantitatively according to company data or records over a certain period of time. Consequences (severity) criteria used are the consequences that workers will receive which are defined qualitatively and take into account the lost working days. So from the results of the study informed that work accidents affect work productivity.

References

Anthony, M. B. (2019). Analisis Risiko Keselamatan Dan Kesehatan Kerja Menggunakan Metode HAZOP’s Di Area Gas Cleaning System Di PT. RK. Jurnal Ilmiah Teknik dan Manajemen Industri Universitas Kadiri, 1-12.

Bayu Nugroho Pujiono, I. P. (2013). ANALISIS POTENSI BAHAYA SERTA REKOMENDASI PERBAIKAN DENGAN METODE HAZARD AND OPERABILITY STUDY (HAZOP) MELALUI PERANGKINGAN OHS RISK ASSESSMENT AND CONTROL (Studi Kasus: Area PM-1 PT. Ekamas Fortuna). Jurnal Rekayasa dan Manajemen Sistem Industri, 253-264.

Dian Palupi Restuputri, R. P. (2015). ANALISIS KECELAKAAN KERJA DENGAN MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY (HAZOP). Jurnal Ilmiah Teknik Industri, 24-35.

Flippo, E. B. (1995). Manajemen Personalia edisi VI. Jakarta: Erlangga.

Hanggraeni, D. (2012). Manajemen Sumber daya Manusia. Jakarta: Lembaga Penerbit FE UI.

Ikhwan, L. M. (2019). HUBUNGAN PENGETAHUAN TENTANG PENGGUNAAN ALAT PELINDUNG DIRI (APD) DENGAN KEPATUHAN PENGGUNAAN APD PADA PERAWAT DI PUSKESMAS KUOK. PREPOTIF Jurnal Kesehatan Masyarakat, 50-57.

Iraj Mohammadfam, A. S. (2012). Application of Hazard and Operability Study (HAZOP) in Evaluation of Health, Safety and Environmental (HSE) Hazards. INTERNATIONAL JOURNAL OF OCCUPATIONAL HYGIENE, 17-20.

Juliana, A. I. (2008). Implementasi Metode HAZOPs dalam Proses Identifikasi Bahaya dan Analisa Risiko Pada Feedwater System di Unit Pembangkitan Paiton PT. PJB. Surabaya: Politeknik Perkapalan Negeri Surabaya.

K. Muthukumar, M. S. (2018). Hazard Operability Study (HAZOP) in a Fertiliser Plant. International Journal of Recent Technology and Engineering (IJRTE), 201-207.

Maharani Ratri Windy Sabrina, Y. W. (2019). ANALISIS POTENSI BAHAYA DENGAN METODE HAZARD AND OPERABILITY STUDY MELALUI PERANGKINGAN RISK ASSESSMENT STUDI KASUS: DIVISI SPINNING UNIT 4 RING YARN PT APAC INTI CORPORA. Semarang: Departemen Teknik Industri, Fakultas Teknik, Universitas Diponegoro.

Mangkunegara. (2002). Manajemen Sumber Daya Manusia. Bandung: PT. Remaja Rosdakarya.

Novianti, N. D. (2015). PADA PEKERJA PENGECORAN LOGAM PT. SINAR SEMESTA. Jurnal Kesehatan Masyarakat, 417-428.

Nugroho, S. (2018). ANALISA DAN UPAYA PENGENDALIAN KECELAKAAN PADA BAGIAN PRODUKSI KALENG PT. XY SIDOARJO DENGAN PENDEKATAN HAZOP. Surabaya: Progam Studi Teknik Industri, Universitas 17 Agustus 1945 Surabaya.

Nur, M. (2018). Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) Di PT. XYZ. Jurnal Teknik Industri, 133-138.

Penulis. (2021).

Sarah Putri Aprilia, B. S. (2020). Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) : Studi Kasus PT. Nusa Palapa Gemilang. Peforma: Media Ilmiah Teknik Industri, 1-8.

Shagufta Ishtiaque, S. S. (2019). Hazard and Operability Analysis (HAZOP) of a Plastic Manufacturing Plant at Karachi, Pakistan. Journal of Applied and Emerging Sciences, 1-7.

Simanjuntak, J. P. (1994). Manajemen Keselamatan dan Kesehatan Kerja. Jakarta: HIPSMI; 1994. Jakarta: HIPSMI.

Suma'mur. (2001). Higiene Perusahaan Dan Kesehatan Kerja (Hiperkes). Jakarta: Sagung Seto.

Suma'mur. (2013). Keselamatan Kerja dan Pencegahan Kecelakaan. Jakarta: PT Toko Gunung Agung.

UNSW Health and Safety. (2008). Risk Management Program. Canberra: University of New South Wales.

Published
2022-06-10
How to Cite
Ramadhan, A., & Momon, A. (2022). Tinjauan Keselamatan Kerja dengan Metode Hazard and Operability Study (Hazop). Jurnal Ilmiah Wahana Pendidikan, 8(9), 51-67. https://doi.org/10.5281/zenodo.6629964