Perancangan Tata Letak Fasilitas Gudang Produk Jadi menggunakan Metode Activity Relationship Diagram Pada PT JVC Electronics Indonesia
Abstract
PT JVC Electronics Indonesia (PT JEIN) is a large company engaged in the electronics industry, especially in the car audio section. In doing the design, this research uses the ARC and ARD methods. Based on the results obtained, it can be seen that the current layout condition is considered to be less than optimal because, in the design process and the placement of attributes in the warehouse, they are not in sync and transportation is hampered. The proposal for improving the warehouse layout at the company is obtained by placing the components of the warehouse based on the level of importance and frequency of products going in and out of the warehouse. It was identified that Asian, European, and American products were the products that experienced the most frequent in and out of the warehouse. Therefore, the three products are placed in a place that is easily accessible during transportation. While the other two products, namely Japanese and local products, were placed in another position, namely on the side of the warehouse. The layout change aims to increase the effectiveness of the movement of goods and reduce the occurrence of product variance.
References
Alamsyah, A. D. & Suhartini, 2021. Usulan Rancangan Tata Letak Fasilitas Proses Replating Kapal dengan Menggunakan Metode ARC dan ARD (Studi Kasus di Sbu Galangan Pelni Surya). Surabaya, Fakultas Teknologi Industri, Institut Teknologi Adhi Tama Surabaya, pp. 65-.
Daputra, A., Wahyudi, T. & Uslianti, S., 2020. Penerapan Good Manufacturing Practice Dan Work Improvement In Small Enterprise pada Usaha Kecil dan Menengah Sebagai Pemenuhan Standar Kesehatan. Jurnal TIN Universitas Tanjungpura, IV(2), pp. 23-29.
Ekoanindiyo, F. A. & Wedana, Y. A., 2012. Perencanaan Tata Letak Gudang menggunakan Metode Shared Storage di Pabrik Plastik Kota Semarang. Dinamika Teknik, VI(1), pp. 46-57.
Ekoanindiyo, F. A. & Wedana, Y. A., 2012. Perencanaan Tata Letak Gudang Menggunakan Metode Shared Storage di Pabrik Plastik Kota Semarang. Dinamika Teknik, VI(1), pp. 40-57.
Furqani, B., 2017. Rancangan Tata Letak Gudang dengan Manggunakan Metode Class-Based Storage dan Racking (Studi Kasus pada Minimarket Indah), Bandung: Fakultas Ekonomi dan Bisnis, Universitas Padjajaran.
Harjono, R. & Prasetyawan, Y., 2020. Perancangan Tata Letak Gudang Untuk Meminimumkan Jumlah Produk yang Tidak Tertampung dalam Blok dan Efisiensi Aktivitas Perpindahan Barang di Divisi Penyimpanan Produk Jadi PT. ISM Bogasari Flour Mills Surabaya.
Johan & Suhanda, K., 2018. Usulan Perancangan Tata Letak Gudang dengan Menggunakan Metode Class-Based Storage (Studi Kasus di PT Heksatex Indah, Cimahi Selatan). Journal Of Integrated System, I(1), pp. 52-71.
Kemala, W. & Karo, G. K., 2011. Usulan Perencanaan Tata Letak Gudang Produk Jadi dengan Menggunakan Metode Muther's Systematic Layout Planning dan Dedicated Storage. Journal of Industrial Engineering & Management System, IV(2), pp. 69-96.
Kurniawan, G., 2016. Laporan Kerja Praktek Tata Letak Fasilitas Pabrik Departemen Gudang di PT Boton Indonesia , Jakarta: Fakultas Teknik, Universitas Mercubuana.
Nelfiyanti & Sulasmini, R., 2014. Perbaikan Tata Letak Fasilitas Cell Produksi Dengan Menggunakan Work Cell in Proses Layout Untuk Meningkatkan Effisiensi Cell 8 di PT. Shyang Yao Fung. JISI: Jurnal Integrasi Sistem Industri, I(1), pp. 22-35.
Rahmadani, W. I., 2020. Perancangan Ulang Tata Letak Gudang Menggunakan Metode Konvensional, Corelap Dan Simulasi Promodel. Jurnal Optimasi Teknik Industri, II(1), pp. 13-18.
Sriyanto, Puspitasari, N. B. & Erdiawan, A. H., 2016. Perancangan Tata Letak Fasilitas Pada MPC (Mail Post Center) PT Pos Indonesia, Semarang Menggunakan Activity Relationship Chart. Industrial Engineering Online Journal, V(2), pp. 1-6.
Yohanes, A., 2012. Analisis Perbaikan Tata Letak Fasilitas Padagudangbahan Baku dan Barang Jadi Dengan Metode Share Storage Di PT. Bitratex Industries Semarang. Dinamika Teknik, VI(1), pp. 25-34.
Yuliana, L., Febianti, E. & Herlina, L., 2016. Usulan Perbaikan Tata Letak Gudang dengan Menggunakan Metode CRAFT (Studi Kasus di Gudang K-Store, Krakatau Junction). Jurnal Teknik Industri, IV(2), pp. 1-6
