Analisis Postur Kerja Dengan Metode Rapid Upper Limb Assessment (Rula) dan Nordic Body Map Pada Pekerja Produksi di PT. Jayamas Medica Industri Kab. Sidoarjo
Abstract
Musculoskeletal disorders (MSDs) are disorders of the skeletal muscles. According to the Bureau of Labor Statistics (BLS), there were 387,820 cases ofmusculoskeletal disorders (MSDs) from the total injuries and illnesses of workers in 2011. This study aims to analyze the level of risk, occupational risk at work. position using the Rapid Upper Limb Assessment (RULA) method. to production workers at PT. Jayamas Medica Industri, Sidoarjo Regency. This study used an analytic observational research design with a cross sectional approach. The population of this study are workers in the manufacturing section. The resulting sample is 29 using the Slovin formula and the sampling technique using a random sampling system. The variables of this research are personal and work factors, work posture, RULA method, and Nordic Body Map (NBM) questionnaire. This analytic data only generates the frequency and percent distribution of each variable and is interpreted as tables and stories. The results showed that most of the respondents complained about the lower neck as much as 79% and the upper neck as much as 69%. With this, the researchers calculated using the RULA method, the results obtained from the RULA method were respondents with serious complaints that needed further examination. Summarizing the results and discussing workers' complaints or disturbances, the recommended suggestions are stretching, designing the workplace according to the needs of workers, conducting training and socialization activities. Therefore, the researcher designed the workstation as a table and chair.
References
Ayu, F., & Ratriwardhani, R. A. (2021). Relationship Of Work Position With Complaints Of Musculoskeletal Disoeders (Msds) In Cracker Industrial Worker At Kedungdoro Village, Sidoarjo. Iop Conference Series: Earth And Environmental Science, 747(1). Https://Doi.Org/10.1088/1755- 1315/747/1/012105
Bambang, E., & Atmojo, T. (2020). Analisis Nordic Body Map Terhadap Proses Pekerjaan. 3(1), 30–33.
Briansah, A. O. (2018). Analisa Postur Kerja Yang Terjadi Untuk Aktivitas Dalam Proyek Konstruksi Bangunan Dengan Metode Rula Di Cv.Basani. 1–70. Https://Dspace.Uii.Ac.Id/Handle/123456789/11895
Hadyan, A. F., Saptadi, S., & Mt, S. T. (N.D.). Menentukan Postur Kerja Yang Baik Pada Pt Arisamandiri Pratama. 7, 1–5.
Halomoan, J., & Bakhtiar, A. (2016). Analisa Postur Kerja Dengan Metode Rula Pada Pekerja Cv.Mansgroup. Industrial Engineering Online Journal, 5(4), 6.
Maulana, H. (2017). Penanganan Keluhan Low Back Pain Menggunakan Metode William Flexion Back Exercise Pada Perajin Batik Di Sumbersari Batik Kabupaten Bondowoso. Kesehatan Lingkungan Dan Kesehatan Keselamatan Kerja Fakultas Kesehatan Masyarakat Universitas Jember, Http://Repository.Unej.Ac.Id/Handle/123456789/80972
Oesman, T. I., Irawan, E., & Wisnubroto, P. (2019). Analisis Postur Kerja Dengan Rula Guna Penilaian Tingkat Risiko Upper Extremity Work- Related Musculoskeletal Disorders. Studi Kasus Pt. Mandiri Jogja Internasional. Jurnal Ergonomi Indonesia (The Indonesian Journal Of Ergonomic), 5(1), 39. Https://Doi.Org/10.24843/Jei.2019.V05.I01.P06
Patrianingrum, M., Oktaliansah, E., & Surahman, E. (2015). Prevalensi DanFaktor Risiko Nyeri Punggung Bawah Di Lingkungan Kerja Anestesiologi Rumah Sakit Dr. Hasan Sadikin Bandung. Jurnal Anestesi Perioperatif, 3(1), 47–56. Https://Doi.Org/10.15851/Jap.V3n1.379
Tarwaka. (2015). Ergonomi Indusrti (Dasar-dasar Pengetahuan Ergonomi dan 60 Aplikasi di Tempat Kerja. Surakarta: Harapan Press
Notoatmodjo, S. (2012). Metodologi Penelitian Kesehatan. Jakarta: Rineka Cipta.
Hignett, S., McAtamney, L. (2000). Applied Ergonomics. New York: Cornell University.
Tarwaka. (2010). Ergonomi Industri Dasar-dasar Pengetahuan Ergonomi dan Aplikasi di Tempat Kerja. Surakarta : Harapan Press.
