Perancangan Pada Poros Roda Depan Motor Honda Astrea Grand 100cc Tahun 1997
Abstract
In everyday life, motorcycles are familiar vehicles. Motorcycles are a combination of various components that work together to support each other and are integrated so that they function properly. Motorcycles can run perfectly if all components are in good condition. One of the parts of a motorcycle is the front wheel. The wheel axle is a rotating stationary part, usually round in cross section which is attached to elements such as gears, pulleys, flywheels, cranks, sprockets and other moving elements. This shaft serves to support the load of the vehicle itself as well as loads from outside such as, humans or cargo on a motorcycle. The purpose of this study is to find out the diameter that must be used on the front wheel axle of the honda astrea grand 100cc motor. the method used is experimentation. The results of this study obtained the maximum normal voltage value on the shaft with a value of 370 Mpa, a security factor of 2.01, a permissible normal voltage of 286,06 Mpa and a shaft diameter used of 10 mm.
References
R. Subagja, Kardiman, I. N. Gusniar, and S. Faizal, “PERHITUNGAN POROS RODA DEPAN PADA SEPEDA MOTOR CRF 150 CC,” binapatria, vol. 16 No.11, 2022.
A. Aji, Kardiman, J. Sumarjo, and M. A. Alfaridzi4, “ANALISA KEKUATAN PADA POROS RODA DEPAN MOTOR HONDA BLADE 110R TAHUN 2010 DENGAN MATERIAL St90 JIS SCM 447–AISI 4340,” J. Mech. Eng. Mechatronics, vol. 6 No.2, 2021.
A. Lostari and R. Y. Hartono, “Perbandingan Kualitas Poros Roda Depan Honda Beat Orisinil dan Imitasi,” Multitek Indones. J. Ilm., vol. 12 No.2, 2018.
M. M. Albuhori1, Kardiman, and V. Naubnome, “Perancangan Poros Roda Depan Motor Yamah New Jupiter MX 135cc 2014,” J. Ilm. Wahana Pendidik., vol. 8, 2022, doi: https://doi.org/10.5281/zenodo.7170106.
Ipanase, “Spesifikasi Motor Honda Astrea Grand 100cc Tahun 1997,” pertamax7.com, 2022, [Online]. Available: https://pertamax7.com/2022/02/22/spesifikasi-honda-astrea-grand-bulus
