Usulan Perancangan Alat Pengering Inframerah Untuk Meminimalisir Waste Waiting Pada Proses Produksi Dental Aerosol Dengan Menggunakan Pendekatan Pengembangan Produk

  • Helena Dinda Putri Naila Universitas Telkom
  • Pratya Poeri Suryandhini Universitas Telkom
  • Ayudita Oktafiani Universitas Telkom

Abstract

According to the Ministry of Health, after the COVID-19 situation there are still health sector challenges, namely the Triple Burden of Diases, so it is necessary to support the availability of quality medical devices to prevent these challenges from occurring. One of the companies that produce medical devices is PT. XYZ which produces dental aerosol as one of its products. Dental aerosol can play a role in facing the triple burden of diseases in preventing infectious diseases and preventing the emergence of new diseases, so that in the production process it is necessary to make efforts to prevent waste. Based on PAM data, the largest percentage is owned by NVA activities or activities that do not add value at 64%. So it is necessary to reduce waste waiting in the dental aerosol production process using the just in time approach. The results of this study can fulfill the goal of minimizing waste waiting during the assembly process that occurs in the drying process. The proposal to reduce waste waiting is to design a dryer using infrared light with the concept selection method. Based on the proposed design, there is a reduction in waste waiting time in the dental aerosol production process by 85%.

References

Bicao, P., Jianhua, W., Xuping, S., Zhi, L., & Fucheng, Y. (2008). Effects of zinc bath temperature on the coatings of hot-dip galvanizing. Surface Coatings & Technology, 1785–1788.

Callister, W. D., & Rethwisch, D. G. (2014). Materials Science and Engineering. United States of America: John Wiley & Sons, Inc.

Ginting, R. (2007). Sistem Produksi. Yogyakarta : Graha Ilmu.

Groover, M. P. (2015). Automation Production Systems, and Computer Integrated Manufacturing. Upper Saddle River: Pearson Higher Education.

Karl T. Ulrich & Steven D. Eppinger. (2016). Product Design and Development.

In Handbook of Research on New Product Development (Sixth Edit).

Kinnan , T., Kondo, Y., Aoki, M., & Susumu , I. (2020). How do drying methods affect quality of films? Drying Technology, 653-664.

Kasim, U., Erdiana, N., & Aulia, D. (2021). The Use of Fishbone Diagram Technique to Improve Students’ Writing Ability. Proceedings of The 11th Annual International Conference (AIC) (pp. 29-30). Banda Aceh: Social Sciences.

Manfaati, R., Baskoro, H., & Rifai, M. M. (2019). Pengaruh Waktu dan Suhu Terhadap Proses . Fluida, 43-49.

Masalah dan Tantangan Kesehatan Indonesia Saat Ini. (2020). From kesmas.kemkes.go.id: https://kesmas.kemkes.go.id/konten/133/0/masalah-dan-tantangan-kesehatan-indonesia-saat-ini

Mischke, P. (2010). European Coatings Tech Files. Germany: Vincentz Network.

Published
2024-02-12
How to Cite
Naila, H., Suryandhini, P., & Oktafiani, A. (2024). Usulan Perancangan Alat Pengering Inframerah Untuk Meminimalisir Waste Waiting Pada Proses Produksi Dental Aerosol Dengan Menggunakan Pendekatan Pengembangan Produk. Jurnal Ilmiah Wahana Pendidikan, 10(3), 334-342. https://doi.org/10.5281/zenodo.10638062