Analisis Respon Pembacaan Sensor Beban (Load Cell) dengan Menggunakan Autonics TK4S
Abstract
An analysis of the characteristics of the temperature control system has been carried out on a prototype clothing dryer based on the Autonics TK4S-14RN. A control system is a process control system that aims to obtain a variable at a certain value. The closed loop control system is the control system used in this research which consists of control implementation elements in the form of on/off control types on the load system (load cell). The correction element is in the form of the Autonics TK4S-14RN programming procedure as software. The measurement element uses a PT100 RTD sensor series with a sensitivity of 0.3931Ω/℃, an inaccuracy of ±0.000673, a precision and accuracy error percentage of 0.17% and 1.9%. Characterization of the Autonics TK4S-14RN as a load control (load cell) was carried out to review transient and steady-state responses. The test results obtained an insulated system with a deviation of 0.1℃, so that the steady state system was 0.28% of SV, with ts=140-268 s and Mp = 0.85-1.42%. From the results of this research, the control system created can be used as a basis for load control (load cell).
References
Zaenuri ,muhib ahmad .ST,2008, kekuatan bahan.,bangkalan madura.indonesia.
Halliday, D , Resnick, R., Walker,J., 1997, Fundamentals of Physics, John Wiley and Sons, Kanada.
Carrillo-Bucio, J. L., Tena-Garcia, J. R., Armenta-Garcia, E. P., Hernandez-Silva, O., Cabañas-Moreno, J. G., & Suárez- Alcántara, K. (2018). Low-cost Sieverts- type apparatus for the study of hydrid- ing/dehydriding reac- tions. HardwareX, 4, e00036.
Bolton, W. (2004). Sistem Instrumentasi dan Sistem Kontrol (Judul asli: Instrumentation and Control Systems).
Fradden, J. 2003, Handbook of Modern Sensor, Physics Designs and Applications, Edisi 3, San Diego, California.
Ramang, M., 2010, Penggunaan Strain gauge untuk Analisa Tegangan pada Pembebanan Statik Batang Aluminium, Skripsi, Jurusan Teknik Mesin, Palu
Suri, R.B., 2003, Studi Pembuatan Alat Ukur Berat Tetes Zat Cair Berbasis PC Dengan Sensor Strain gauge, Skripsi, Universitas Andalas, Padang.
