Analisis Risiko K3 Menggunakan Metode Hazard Identification Risk Assessment and Risk Control (HIRARC) Pada Pekerja di PT XYZ
Abstract
A work accident is an event that cannot be predicted when it occurs so that a person's activities can be disrupted in completing a job. In daily activities, potential sources of danger can be found that are easily found in the work environment, in the Production, Packing, and Maintenance section of PT. XYZ. So the purpose of this study is to analyze a potential work hazard and the level of work accidents that occur with the method used, namely the HIRARC (Hazard Identification Risk Assessment and Risk Control) method. carry out a work risk assessment or risk assessment and carry out risk control or risk control to prevent and reduce the occurrence of an accident or potential work hazard. After being analyzed according to a low risk assessment of 37%, moderate risk of 25%, high risk of 25%, and extreme risk of 13%. Furthermore, efforts to prevent work accidents using the control hierarchy are methods for eliminating, substitution, administration, engineering, and personal protective equipment (PPE) for risk control.
References
Afandi, M., Anggraeni, S. K., & Mariawati, A. S. (n.d.). Manajemen Risiko K3 Menggunakan Pendekatan HIRARC (Hazard Identification, Risk Assessment and Risk Control) Guna Mengidentifikasi Potensi Hazard.
Alfatiyah, R. (2017). Analisis Manajemen Risiko Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Metode Hirarc Pada Pekerjaan Seksi Casting. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 11(2), 88–101. https://jurnal.umj.ac.id/index.php/sintek/article/view/2100
Ihsan, T., Edwin, T., & Octavianus Irawan, R. (2017). Analisis Risiko K3 Dengan Metode Hirarc Pada Area Produksi Pt Cahaya Murni Andalas Permai. Jurnal Kesehatan Masyarakat Andalas, 10(2), 179. https://doi.org/10.24893/jkma.v10i2.204
Jannah, M., Abdullah, R., & Murad, M. (2015). Identifikasi Bahaya, Penilaian Resiko, Dan Pengendalian Resiko Pada Aktivitas Tambang Batubara Di Pt. Kim Kabupaten Muaro Bungo, Provinsi Jambi. Bina Tambang, 2(1), 258–270. http://ejournal.unp.ac.id/index.php/mining/article/view/5287
Juarni, D., & Hutabarat, B. W. (2019). Analisa Tingkat Risiko Kecelakaan Kerja pada Bagian Foundry di PTPN IV Unit Pabrik Mesin Teneradolok Ilir. Semnastek Uisu, 182–188.
Kani, B. R., Mandagi, R. J. M., Rantung, J. P., & Malingkas, G. Y. (2013). Keselamatan dan Kesehatan Kerja pada Pelaksanaan Proyek Konstruksi (Studi Kasus: Proyek PT. Trakindo Utama). The International Handbook of Psychology, 1(6), 479–496. https://doi.org/10.4135/9781848608399.n25
Parianti, E. (2017). Analisis pengendalian resiko pada usaha keripik singkong. Jurnal Manajemen Magister, 03(01), 32–41. https://jurnal.darmajaya.ac.id/index.php/jmmd/article/view/964/611
Primasanti, Y., & Indriastiningsih, E. (2019). Analisis keselamatan dan kesehatan kerja (k3) pada departemen weaving pt panca bintang tunggal sejahtera. Jurnal Ilmu Keperawatan, 12(1), 55–77. http://www.jurnal.usahidsolo.ac.id/index.php/JIKI/article/view/334/281
Putri, R. N., & Trifiananto, M. (2019). Analisa Hazard Identification Risk Assessment and Risk Control (Hirarc) Pada Perguruan Tinggi Yang Berlokasi Di Pabrik. Seminar Dan Konferensi Nasional IDEC, 2–3. file:///D:/Documents/Semester 7/Jurnal/referensi jurnal/ID125.pdf
Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Seminar Nasional Riset Terapan, November, 164–169.
Septianto, A., & Wardhani, A. R. (2020). Penerapan Analisis Resiko Terhadap Kesehatan Dan Keselamatan Kerja(K3) Pada Pt. X. Jurnal Aplikasi Dan Inovasi Ipteks “Soliditas” (J-Solid), 3(1), 7.
