Perencanaan Penukar Panas Tipe Coil sebagai Pemanas Air dengan Memanfaatkan Panas Gas Buang
Abstract
The coil type heat exchanger is one of the important parts in the process of transferring heat from the exhaust heat to the water. This coil type heat exchanger has not been widely used in combustion exhaust gases. Heat transfer from gas to water in the coil is carried out by conduction and convection along the exhaust. The heat received by the water in the coil will change the liquid phase into steam and then the water vapor will naturally move to flow in the heat exchanger. The volume of water in the coil is half of the volume of the coil heat exchanger pipe. From the results of my research and simulations, the water in the water tank can be heated up to 82 oC. This heat exchanger is able to transfer heat from the hot water coming out of the heat exchanger in the exhaust into the water in the water tank (shell) as much as 2 liters. The final result of the calculation required a heat flow rate of 158.13 Watt.
References
Holman, J.P, Jasfi, Perpindahan kalor, Edisi ke Enam, Erlangga, Jakarta, 1986.
Kakak, Sadik & Liu, Hongtan, Heat Exchangers, Selection. Rating, and Thermal Design, Second edition, CRC Press, New York, 2002.
Kreit, Frank, Perpindahan Panas, Third Edition, Mc Graw-Hill, New York, 1994
Perkins dan Reynolds, Harahap, Filino , Termodinamika Teknik, Edisi kedua, Erlangga, Jakarta, 1991
White, Frank, M, Fluid Mecahanics, Mc Graw Hill, USA, 1994
Zainuddin , Jufrizal , Eswanto, Pemilihan Kapasitas Panas Dan Temperatur Udara Alat Penukar Kalor Shell Helical Coil Multi Tube Untuk Kebutuhan Pengering Gabah Tipe Rotari Dengan Memanfaatkan Thermal Gas Buang Mesin Diesel, Jurnal Ilmiah Mekanika, volume 15 Nomor 2, September 2016
Ulil, Amri Upaya Peningkatan Performance Acwh Dengan Penambahan Sirip Pada Apk Shell Helical Coil, Tugas Akhir, Program Studi Teknik Mesin Fakultas Teknik Universitas Muhammadiyah Sumater A Utara Medan
