Perhitungan Poros, Puli Dan Sabuk – V Pada Kompresor Merk Shark Lzpm-5114

  • Iwan Nugraha Gusniar Universitas Singaperbangsa Karawang
  • Bayu Nugroho Putra Santoso Universitas Singaperbangsa Karawang

Abstract

In this modern era, technology is developing very rapidly, so that higher education programs are developed as maintenance, research and development centers. The task of machine elements is a good exercise for students so they can apply the knowledge they have acquired in the form of an analysis of an equipment. Compressor engines generally use electric motors, gasoline engines, or diesel engines as their driving force. The compressor also transmits power from one shaft to another through pulleys that rotate at the same or different speeds which is transmitted through a V-belt that is wound on the compressor pulley which will move back and forth on the piston/piston. For example, a compressor in a workshop is used to fill air in car or motorcycle tires. Compressors are also used to clean dirty engine parts and other benefits that are often encountered daily.

References

Yospianta. 2012. Kompresor Torak. http://yospianta.blogspot.co.id (Diakses

/11/2018)

Mahdiy. 2013. Perhitungan Pembebanan pada Poros.

http://mahdiy.wordpress.com (Diakses 25/11/2018)

HeruIryanto. 2013. Tugas Elemen Mesin 1 Poros Engkol.

http://blogheruiryantoelemenmesin1.blogspot.co.id (Diakses 24/11/2018)

Purwanto Andi. 2012. Perhitungan Dan Perancangan Pada Poros Transmisi.

(Diakses 24/11/2018)

Published
2023-04-30
How to Cite
Gusniar, I., & Santoso, B. N. (2023). Perhitungan Poros, Puli Dan Sabuk – V Pada Kompresor Merk Shark Lzpm-5114. Jurnal Ilmiah Wahana Pendidikan, 9(8), 227-234. https://doi.org/10.5281/zenodo.7886062

Most read articles by the same author(s)